Alloy 310
Introduction :
Fortune Ferroment Inc is one of the companies who use quality metal in their procedures set an industry standard that competitors who cut angles can never reach. Whatever your industry is, you should only use dependable alloys for your piping needs. If you need stainless steel pipe, valves, or fittings that resists erosion for your high-temperature applications, contact us for alloy 310. As a pipe distributor, we have all your alloy needs in one place.
Many diverse companies use alloy 310 for a variety of high-pressure piping drives. This heat-resistant alloy stays strong at raised temperatures. 310 also has a lower constant of expansion than other products in the 300 stainless steel line, which makes it perfect for its use in petroleum refining.
Other industry applications for 310 include:
- Thermal processing
- Power generators
- Ore processing
- Furnace components
- Food processing
- Cryogenic components
Chemical Composition for Alloy 310
| C | Cr | Mn | Mo | Ni | P | S | Si |
|---|---|---|---|---|---|---|---|
| Max | – | Max | Max | – | Max | Max | Max |
| 0.08 | 24.0 – 26.0 | 2.0 | 0.75 | 19.0 – 22.0 | 0.045 | 0.03 | 0.75 |
Physical Properties for Alloy 310
|
Properties |
at |
Value |
Unit |
|---|---|---|---|
| Density |
|
8,000 |
Kg/m3 |
| Electrical Conductivity |
25°C |
1.25 |
%IACS |
| Electrical Resistivity |
25°C |
0.78 |
Micro ohm.m |
| Modulus of Elasticity |
20°C |
200 |
GPa |
| Shear Modulus |
20°C |
77 |
GPa |
| Poisson’s Ratio |
20°C |
0.30 |
|
| Melting Rnage |
|
1400-1450 |
°C |
| Specific Heat |
|
500 |
J/kg.°C |
| Relative Magnetic Permeability |
|
1.02 |
|
| Thermal Conductivity |
100°C |
14.2 |
W/m.°C |
| Coefficient of Expansion |
0-100°C |
15.9 |
/°C |
Mechanical Properties for Alloy 310
|
Mechanical Properties |
310 |
|---|---|
| Grade 0.2 % Proof Stress MPa (min) |
205 |
| Tensile Strength MPa (min) |
520 |
| Elongation % (min) |
40 |
| Hardness (HV) (max) |
225 |